Single Swing Driveway Steel Gate with 4 ft Pedestrian Gate – Madrid Style

What's included with this installation?
We will Coordinate with proper authorities about utility and electrical lines.
We will Removal of existing Gate (when applies).
We will Dig 36'' in the ground to mount the metal post on each side of the prospect gate.
We Will Install of 2 Posts on each side.
We will Align the posts accordingly.
We will Apply cement to mount each post.
We will Attach the hinges of the gate to each post.
AWe will align the gate accordingly.

Why should I get help installing my Gate?
Gates installation is a complex job which is best performed by a qualified, trained and licensed professional. The process of the gate installation can involve heavy digging, authorities coordination, cement work and proper alignment below and above ground. Improper installation can void your gate warranty, risk in cutting essential gas or electric lines or even result in harm.

Liftmaster Residential-Single Gate Opener Features:
LED Diagnostic Display – Simplifies installation and troubleshooting
Solar-ready Ultra-reliable System – Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance
Bi-Part Delay – Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
Synchronized Close – Simultaneously closes gates
Programmable Auxillary Relays – Eliminates expensive conduit costs and unsightly driveway scars.
Anti-Tailgate – Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once the vehicle backs up, the gate will continue to close.
Quick Close – Closes the gate immediately after a vehicle pulls off the interrupt loop.
HOMELINK Compatible – Version 4 and higher
Security + 2.0 On-Board Radio Receiver – Up to 50 remote controls (unlimited with 811LM/813LM)

Liftmaster Residential-Single Gate Opener Specifications:
Power: 24VDC or Solar Power. 120/230V Single Phase (Standard control box).
Accessory Power: 24VDC 500mA output. Switched and unswitched power.
Monitored Safety: 3 main board, 3 optional expansion board
UL Usage Classification: I, II, III, and IV
Gate Travel Speed: 90-degree opening in 17-17 seconds
LiftMaster Residential-Single Gate Opener is a swing gate opener that requires 120VAC to power up. The mainboard and gate arm requires 24VDC to function. The unit automatically converts 120AC to 24VDC to keep the built-in battery charged for the gate to operate.

Construction:
P3 Motor®: 24VDC continuous-duty motor
Operator Duty Rating: 100 cycles per day.
Chassis: Constructed with 1/4″ gold zinc-plated steel for rust prevention
Worm Gear Reduction: Precision machined all-metal gear drive.
Operator Weight: Actuator arm 19 lbs. Standard control box 13 lbs. Includes (2) 7Ah batteries
Recommended Capacities: Rated for gates up to 16 ft. in length or weighing up to 850 lbs.

PLEASE NOTE: ELECTRIC WORK AT/TO THE GATE’S LOCATION IS NOT INCLUDED (PLEASE BOOK A FREE ESTIMATE)

The Vehicle Motion Sensor for Gates is designed to reliably detect the presence of a stationary or moving vehicle while also having the ability to ignore most human traffic. It will allow an automatic free exit of vehicles exiting your property. This sensor is mounted underground.

Include:
One (1) Vehicle Motion Sensor
Labor & Installation